Jumpys Project! Options

[Spudly]

Great to see you get a start there jumps!!

Do you have a time line for the build??

[Jumpus GooDarus]

All depends on how the old body holds up

2 - 3 months if all goes well

[Christos]

In the same year?

[poly]

more to the point, have you got some one to help with those heavy sheets as your health is the most impotent thing of all with out it the boat is on good to you at all.
Paul

[xtosea]

Great start, if you ever need any help, just give me a tinkle, we'll be over in a flash if we have time, Jen Sookie and myself. Would love to help out and learn anything i can.
Kamil

[Jumpus GooDarus]

more to the point, have you got some one to help with those heavy sheets as your health is the most impotent thing of all with out it the boat is on good to you at all.
Paul

Sheets aren't all that heavy poly just awkward to handle that's why they're stacked against the wall like that, I dont lift any of them just flip them down onto milk crates I'm only lifting the cut out frames around 20 kgs each.

Mind you the hull & sides skins will be a pain in the butt to handle sides over 7 meters in length that's when the fork lift will come in handy.

Would love to help out and learn anything i can.

Amazing how many peeps are interested in the project.

[xtosea]

Yeah JG for sure, your putting together a weapon from scratch! Not often do average Joes like myself get to see that happen, i mean it and so does Jen, if you ever need help, we'll be there in a flash, anything we can do will be our pleasure.

PS- on a side note, i have found the perfect woman, she is just so keen on fishing i cant explain it!!!!!!!! I have struck gold!!!!!!!!!!!!!!!!!!!

[kkw]

mean it and so does Jen, if you ever need help, we'll be there in a flash, anything we can do will be our pleasure.

What about pookie? Will she get bored quickly? Will she be warm enough?

[Jumpus GooDarus]

Geez dont you know anything kk ???????

The name is Sooky & it's the 1st Chiwawawa that I've ever come across that didn't bark @ me

Bloody got sharp claws though

[Christos]

Amazing how many peeps are interested in the project.

This is a simple reason for it. You are building something. I look at the wood working forum for the same reason. Similar thing to when they build the ANZAC bridge. Would drive on the old bridge and try to look while I was driving pass. Good thing I did not cause an accident. Another thing was a sister was living in an apartment building next to a building site of a house. I would visit her and look out the windows down at the building site to see the progress. Got to a stage that she asked me are you visiting her or coming to see the building site. Took me a few seconds to think about that and gave the answer "Of course I am coming to see the progress of the building"

[quintrex101]

hehe good luck jg hope all goes well ... well have to see you on the water when its ready !!

[Jumpus GooDarus]

Yea Christos I had my reasons for making it a closed topic & only making the pics visible to members only.

There's alot of non posting people viewing this site & if they want to learn or know anything then they should become active

[Jumpus GooDarus]

hehe good luck jg hope all goes well ... well have to see you on the water when its ready !!

Still got 2 goats I can fish from anytime I want to.

once water temp starts to rise I'll be out there again

[quintrex101]

no i mean i will have to see you on the water on the new goat

[Majed]

All depends on how the old body holds up

2 - 3 months if all goes well

Are you going to auction the boat when finished???????..

[storms72]

Good stuff there JG, hope it all comes together without too many hiccups........

I'm with kamil mate, if you need a hand-gimme a yell would be interesting to see how you go about building such a large boat yourself----should organise a day of BBQ and boat building!

[STEVE.P]

yeh throw another trammel on the barbi

[Christos]

BYO Tamel. Or get them fro Oz Man

[Jumpus GooDarus]

Well I was going to do an update in the main thread but left the camera behind & I'm not going back to get it

Gonna have to wait till 2morro

[poly]

Well I was going to do an update in the main thread but left the camera behind & I'm not going back to get it

Gonna have to wait till 2morro

bugger

[Bees Knees]

Looks great Jumpus... But i really think you should weld that hull up inside there That'll really test you.

[poly]

j.g if I may ask, why cut the boat down by 1ft it dose not make any scene to me.

[Jumpus GooDarus]

Actually I could've gotten away with welding the hull only in there but Frame 9 wont allow me to get it out

[Jumpus GooDarus]

j.g if I may ask, why cut the boat down by 1ft it dose not make any scene to me.

More than a foot poly closer to 3 feet if you include the extended pod.

I would've finished up with a long ugly skinny boat which would've looked out of proportion.

Different story if the boat was to be moored cause I could've widened the beam to make it all proportional

Plus 7.1 meters is one hell of a boat on trailer, also had to consider existing Horse power

[quintrex101]

projects looking good jumpy && i see you have your little friend there helping you called "V"


now wouldnt that double the cost of the project ??

[xtosea]

projects looking good jumpy && i see you have your little friend there helping you called "V"


now wouldnt that double the cost of the project ??

He had many a bottle there, i thnk he owns shares in the factory that make them

This post has been edited by xtosea: Sep 16 2008, 04:11 AM

[jack]

projects looking good jumpy && i see you have your little friend there helping you called "V"


now wouldnt that double the cost of the project ??

Not really, He cuts the tops and bottoms off, flattens and welds them together to create the sheets needed for the cabin. He has a few more to go......


Jack

[Jumpus GooDarus]

Hey guys !

Went Drivies today picking up materials & you wont belief what I found on the side of the road ??

5 sheets of MDF board ideal to make some templates from

Thanks oz I owe you some flathead fillets

[Bees Knees]

Hey guys !

Went Drivies today picking up materials & you wont belief what I found on the side of the road ??

5 sheets of MDF board ideal to make some templates from

Thanks oz I owe you some flathead fillets

I hope you got him a new FOS shirt Jumpus... One that fits He deserves it

[oz man]

No problems glad to help, as I said they would have only been used for cover sheets in our place.

[storms72]

You picked out a colour for paint yet jumpy-----V-Green would work, best thing if you run out of V you can just lick the boat!

[Christos]

Now you are just being mean to poor little Jumpy who can not defend himself.

[poly]

j.g the holes that have been drilled to bolt the framer to the jig, will they be welded up or left as is ?????????

[Jumpus GooDarus]

Nope !

No need to, all holes are below floor level & none will be seen, if anything I'll drill them out to a larger size & run the Fuel lines throgh them.

Only the transom holes will need plugging up with welding.

I've been dead as a doornail last couple of days, came home early today so was in a bit of a mood to post.

OK no pics but the whole project has been dismantled & moved out back

Set up the Jig late yesterday with failing light which suited the Laser Level cause I could see the laser, chocked up all the legs with packers good slope in concrete slab so up to 10 inch's of packing on one of the legs.

Clamped extentions to legs & welded them on this morn after that I machined out water run off slots in the frames where the stringers run through.

Bolted everything up, welded in all the stringers, lined up the transom welded that in & called it a day cause of the wind taking away the gas.

Have to organise a big tarp to go over the job cause any wind & I'm stuffed.

After 2morro I'll be ready to start skinning the project

[poly]

it is moving along at a pace that's for sure, have any of the skin plates been cut out yet ????????

[xtosea]

Dude, you are a master!!!!! The $hit is coming together so well!
ALl praises to you.
Try and come visit 2moro.
See how i go, i'll ring ya.

[poly]

this may help with the choice of color for the boat


Red symbolizes: action, confidence, courage, vitality


Pink symbolizes: love, beauty


Brown symbolizes: earth, order, convention


Orange symbolizes: vitality with endurance


Gold symbolizes: Wealth, prosperity, wisdom


Yellow symbolizes: wisdom, joy, happiness, intellectual energy


Green symbolizes: life, nature, fertility, well being


Blue symbolizes: youth, spirituality, truth, peace


Purple symbolizes: Royalty, magic, mystery


Indigo symbolizes: intuition, meditation, deep contemplation


White symbolizes: Purity, Cleanliness


Black symbolizes: Death, earth, stability


Gray symbolizes: Sorrow, security, maturity
so what will it be

[jack]

that's easy


Blue, all his boats are blue



Jack

[nimrod]

Well How bloody slow am I ?. I am still buggerising around trying to get some plans for the project, and Jumpy's almost finished the damn thing.
Well that will teach me to go away into the wilderness for 3 weeks.

Jeeze Jumpy you're not mucking around mate, will try and get down there to have a look see and offer any help I am capable of after the week end.
I could bring down my mig if you want a hand to do the long runs etc, it's only 240v but can weld 5mm OK.
Tried to ring you today but your mobile was off.

[Jumpus GooDarus]

Hey Frank if you're still fart arsing about deciding about the floor in you tinny
There's some specials on 5053 2.5 mm alloy sheet 2400mm x 1200mm $99 + GST

Yeah I dont answer the phone when I'm working there was around 30 missed calls today alone

[salty fil]

Good on ya Jump. Im still trying to get my head around you building a boat. A bloody big boat! And youve never done it before!

Really mate, thats awesome.

Its inspired me to go cut the grass today.........

[Bees Knees]

Looks great Pal

Where are the feul tank(s) going?

PS.. 2 of those missed calls were from me! I was ringing to complain about the suprise doodles on the site I was in no way putting in a complaint about those lesbians however!!

[It'l Do]

Jumpy,

What are you using to flatten/linish welds?
e.g. where you joined the sheets at the front and I guess the length of the reverse chines.

What material are you going to for the fuel tanks? Are you going to set up the same flush system again?
And to the others I am not stirring FED, but I am sure he visits the site and wants to know.

Also did you end up buying a pull gun or a standard mig gun?

For those that don't weld a standard mig gun pushes the aluminium wire which is soft and therefore most welders limit the gun lead to 3 metres. A pull gun has a small motor at the gun which helps pull the wire and most are 8 metres which means you don't have to move the mig power source around as much.


Good write up and pictures.


I know I know, I need to finish off that handrail, hopefully this week.

[Jumpus GooDarus]

Jumpy,

What are you using to flatten/linish welds?

Just a 5" grinder to take off any heavy buildup then I just run a Zirconian disk over the area

Haven't had to do any grinding yet but I do have a 6 speed 3phase polisher @ my disposal can run anything from flap wheels to tungsen bits in it

[kkw]

I just run a Zirconian disk over the area

Beam me up Scotty!!!. Is that one of those Romulan terrabite disks out of their hyperdrive system??

This post has been edited by kkw: Oct 6 2008, 10:35 PM

[poly]

hows it going mate, any chance of an update

[poly]

things must be moving along quite a bit by now J.G. any chance of an up date

[Jumpus GooDarus]

Keep 4geting to take the camera poly I walk out of here still 1/2 asleep in the mornings

Not alot has been done to the boat itself since tuesday as it was pissing down for a few days so I worked indoors finishing seat box's kill tank & fuel tanks etc.

Did fit up the fuel tanks to the boat today

Withthe rainy days I also started glassing up all the underfloor flotation & that is a very time consuming task.

I'll go leave the camera with my keys so I dont 4get it

[poly]

thanks mate, it may not sound to interesting what you have been doing, but its all part of the overall job and to be able to read how it all goes together is of interest at least to me and i would think to a lot of others.
i would think that coming home after a hard day it is difficult to add to the thread so i will try not to hound you to much for up dates

[A pirate]

Jumpy,

last we spoke you were still in the final stages of planning i go to sea come home and you have a boat WTF you were not wrong when you said once under way you get into it. That look very impressive and cant wait to see it in all its metal glory well done ... i bow to your master craftsmanship!